Arc XL Replacement Stone: Signs It Needs Swapping and Fit Checks

Quick answer

Only replace the stone in your Gozney Arc XL if it has cracked, chipped, warped, or is heavily stained and no longer bakes evenly. If the stone is intact, clean it and keep cooking. If you do need a new one, the Arc XL Replacement Stone kit (product ID 101675) is the correct part, and it includes the stone plus removal handles, an adjustment tool, a landing bay protective screen, and gloves so you can swap it safely.

How to tell if your Arc XL stone is actually damaged

A working stone will show some darkening and light surface marks after use; that is normal. Real damage looks different. A crack that runs through the stone, a chipped edge, or a stone that rocks when you press a corner are all signs it needs to come out. If the stone has warped, your pizzas will bake unevenly because the heat no longer spreads consistently across the surface. Heavy black carbon build-up that survives a normal clean can also mean the stone is done, especially if it smokes every time it heats up.

• Crack that goes through the stone or branches across the surface: replace.
• Chipped or crumbling edge: replace.
• Stone rocks or sits unevenly in the oven: check the fit first, then replace if the stone itself is warped.
• Dark, baked-on stains that don't lift after cleaning: replace only if they affect baking or cause smoke.

What the Arc XL Replacement Stone kit includes (and why it matters)

The official kit is more than a slab of stone. According to the product details, the Arc XL Replacement Stone kit includes the stone itself, stone removal handles, a stone adjustment tool, a landing bay protective screen, and protective gloves. Those extras exist because swapping a stone means handling a heavy, potentially hot component and reseating it correctly. The removal handles help you lift the old stone without dropping it, the adjustment tool helps you set the new stone level, and the landing bay screen protects the area around the oven mouth while you work. The gloves are there for the same reason you wear them when cooking: heat and sharp edges. Buying the full kit means you don't have to improvise tools or risk damaging the new stone during installation.

Fit check: make sure it's the right stone before you order

The Arc XL Replacement Stone is made for the Arc XL, not the standard Arc or the Dome. If you own a different Gozney oven, this kit won't fit. Before ordering, confirm your oven model on the serial plate or in your manual. If you're unsure, the product page notes to refer to the product manual to check whether this is the correct part for your requirements. That step takes two minutes and avoids a return. Also check that your oven is the Arc XL and not an Arc Lite or another compact model; the stone dimensions and landing bay design differ between models.

When to stop and consider a different fix

If your stone is intact but your pizzas are sticking or burning on one side, the problem may be technique, not the stone. Try adjusting your heat balance, giving the stone more preheat time, or using a light dusting of flour or semolina. A replacement stone won't fix uneven baking caused by a cold spot from poor preheating or a dough that's too wet. If the stone is cracked or warped, though, no amount of technique will save it. In that case, order the replacement kit and follow the included instructions for removal and installation.

Diagnosis: symptom, cause, and action

• Visible crack or chip in the stone: Thermal shock, impact from a dropped tool, or normal wear over time can crack or chip the stone. A cracked stone can split further when heated and may bake unevenly. Replace with the Arc XL Replacement Stone kit. Do not keep cooking on a cracked stone.
• Stone rocks or sits unevenly: The stone may be warped or simply not seated correctly in the oven. First, remove the stone and check for debris or misalignment in the stone cradle. If the stone itself is flat but rocks, reseat it using the adjustment tool. If the stone is warped, it needs replacing. Try reseating first. If the stone is warped, order the replacement kit.
• Heavy black stains that smoke or affect flavor: Baked-on carbon from oils and flour can build up over time. If a normal clean doesn't remove it and it smokes during preheat or leaves a bitter taste on crusts, the stone is compromised. Replace the stone. Cleaning won't restore a carbon-saturated stone.

Product facts

• Arc XL Replacement Stone: Kit to replace the stone in an Arc XL. Includes stone, stone removal handles, stone adjustment tool, landing bay protective screen and protective gloves. You get the stone plus the specific tools needed to lift, align, and protect the oven during the swap, so you don't have to source them separately.