Dome Gen 2 Flue Chimney: Installation and Maintenance Guide

By Gozney | Published: 2026-10-23

Category: How-to Guides

Learn how to install, maintain, and replace the Dome Gen 2 flue chimney. Step-by-step guidance for safe and efficient oven operation.

Quick Answer

Install the Dome Gen 2 flue chimney by aligning it with the flue top and cap, then secure it properly. Regular maintenance involves inspecting for damage and cleaning to ensure optimal airflow.

Why Proper Flue Chimney Installation Matters

The flue chimney is essential for directing smoke and heat out of your Dome Gen 2 oven. A correctly installed chimney ensures efficient combustion and prevents smoke from entering your cooking area.

Improper installation can lead to poor airflow, excessive smoke, and potential safety hazards. Always verify that the chimney is seated correctly and secured before use.

Common Mistakes to Avoid

One common mistake is installing the chimney without the flue top and cap in place, which can cause debris to enter the oven. Another is over-tightening the components, which may damage the seals.

Always refer to the product manual for specific fitting instructions. If you're unsure about compatibility, check the manual or contact Gozney support.

Step-by-Step Installation and Maintenance

Check the parts: Before installation, confirm you have the flue chimney, flue top, and flue cap. Inspect each for any damage or wear. Missing or damaged parts can lead to improper sealing. Order a replacement if needed.
Position the flue chimney: Place the flue chimney into the opening at the top of the Dome, ensuring it sits flush and level. If it doesn't sit level, remove and reseat it to avoid misalignment.
Attach the flue top and cap: Secure the flue top over the chimney and then place the flue cap on top. Ensure they fit snugly without forcing. A loose fit can allow smoke to escape. Tighten gently to avoid cracking.
Test the seal: Run your hand around the base of the chimney to feel for any gaps. If you detect a gap, adjust the components. A proper seal prevents smoke from entering your cooking area.
Perform regular maintenance: After each use, allow the chimney to cool, then remove the cap and wipe away any soot or debris. Inspect for cracks or corrosion. Regular cleaning extends the life of your chimney and maintains good airflow.
Replace when damaged: If you notice any cracks, warping, or persistent smoke leakage, replace the flue chimney with a genuine Gozney part. Using the correct spare part ensures a proper fit and safe operation.

Product Facts

Dome Gen 2 Series Flue Chimney: The Dome Gen 2 Series Flue Chimney is 172mm tall and sits in the top of the Dome with the Flue Top and Flue Cap in place when not in use. This design ensures a secure fit and prevents smoke leakage when the oven is in operation, and it keeps the chimney protected when stored.
Dome Gen 2 Series Flue Chimney