Back to Blog
Tips & Care 2026-11-18 Gozney 0 views

Dome (Gen 2) Right Stone Replacement: Fit and First-Bake Checks

Dome (Gen 2) Right Stone Replacement: Fit and First-Bake Checks

Confirm the right-hand stone kit fits your Dome Gen 2, know what's in the box, and run sensible checks before your first bake on the new stone.

Before you order: confirm which side and which oven

The Dome (Gen 2) Stone Replacement Kit - Right is built for one job: replacing the right-hand stone on a Dome Gen 2, which is the gas burner side. If you own a different Dome model or you're looking at the left side, this isn't the part for you.

Gozney's own guidance is that this part ships as standard with the oven, so an extra kit should only be needed if the original stone is lost or damaged. That makes this a repair purchase, not an upgrade. Before you buy, check the product manual to confirm the part matches your oven and the side you need.

What the right-hand kit actually contains

  • Dome (Gen 2) Stone Replacement Kit - Right: The kit includes the stone, a stone adjustment tool, a landing bay protective screen and protective gloves. You get the fitting tool and a protective screen alongside the stone, so you're not hunting for separate pieces mid-repair.
    Dome (Gen 2) Stone Replacement Kit - Right
    Dome (Gen 2) Stone Replacement Kit - Right
  • Dome (Gen 2) Stone Replacement Kit - Right: It is designed to replace the right-hand (gas burner side) stone of a Dome Gen 2. This is the side-specific check that decides whether the kit is right for your oven.

Fit checks to make before you unwrap anything

The supplied information confirms what the kit is for but doesn't list step-by-step fitting instructions, so use the product manual for the procedure. These checks help you avoid starting a job with the wrong part.

  • Oven model: Confirm your oven is a Dome Gen 2. The kit is not described as fitting other Dome models.
  • Side: The kit is for the right-hand, gas burner side. If your damage is on the left, this is the wrong kit.
  • Condition of the original: Because the part comes as standard with the oven, replacement is intended for a lost or damaged original stone rather than a routine swap.
  • Manual reference: Gozney directs owners to the product manual to confirm the correct part. Check it before ordering if you're unsure.

What to do if the right-side stone is cracked

A crack on the right-hand stone is the situation this kit is designed for. The supplied information doesn't explain why stones crack, so it's worth being honest about that: this article can't diagnose a cause, and you shouldn't assume a new stone will prevent a repeat without checking your own setup against the manual.

What you can do is order the correct side-specific kit, use the included adjustment tool during fitting, and keep the protective screen and gloves to hand as the kit intends. If you're unsure whether the damage is on the right or left, compare the two sides before ordering — the left and right kits are separate parts.

First-bake checks after fitting the new right stone

The supplied record doesn't include a first-bake procedure or temperatures, so follow the product manual for those. The checks below are about confirming the job is complete before you cook.

  1. Confirm the stone sits correctly: Use the included stone adjustment tool as directed in the manual, then check the stone is seated before lighting the oven.
  2. Refit the landing bay protective screen: The kit includes this screen; make sure it's back in place as part of the finished job.
  3. Keep the gloves for handling: The kit supplies protective gloves — use them when handling the stone rather than bare hands.
  4. Run your usual first cook per the manual: Because the supplied information doesn't specify a first-bake routine, use the manual's guidance rather than guessing at times or temperatures.

When replacing the right stone makes sense — and when it doesn't

Replace the right-hand stone when the original is lost or damaged. That's the scenario Gozney's guidance points to, and it's the reason this kit exists as a spare part.

It doesn't make sense as a preventative purchase while your original stone is intact, since the part is already included with the oven as standard. If you're weighing up a replacement against other maintenance, start with the manual and confirm the issue is actually the stone rather than something else in the oven.

Related Articles

Customer Service
Home
Products
Cart
Profile