When You Need This Castor Set
The Dome Gen 2 Series Stand Castor is a set of four spare wheels designed specifically for the Dome Gen 2 Stand. Each wheel includes an easy press foot brake to lock the stand in place. This part is included as standard with the original stand, so you only need to purchase it if the original castors are lost or damaged.
Before buying, confirm compatibility by checking your stand's model against the product manual. The kit is not intended for other Gozney stands or older Dome versions.
Dome Gen 2 Stand Castor at a Glance
- Dome Gen 2 Series Stand Castor: A set of 4 spare castor wheels with easy press foot brakes to be used with the Dome Gen 2 Stand. Confirms the kit is a direct replacement for the original wheels and includes locking brakes for stability.

Dome Gen 2 Series Stand Castor - Dome Gen 2 Series Stand Castor: Please note this part will be included with the original product as standard. Purchase of additional spare parts should only be required if original part is lost or damaged. Helps you avoid unnecessary purchases—only buy if you need a replacement.
- Dome Gen 2 Series Stand Castor: To check if this is the correct part for your requirements, please refer to the product manual. The manual is the definitive source for fitment verification; always consult it before ordering.
How to Replace the Castors
Replacing the castors on your Dome Gen 2 Stand is straightforward. The supplied information confirms the wheels are designed as a direct swap, but specific installation steps are not detailed here. Follow these general checkpoints based on the product's intended use.
- 1. Prepare the stand: Place the stand on a flat, stable surface. If the oven is mounted, remove it safely before starting. Ensure the stand is empty and stable to prevent tipping.
- 2. Remove the old castor: Flip the stand onto its side or access the wheel mounting point. Remove any retaining clip or bolt securing the existing castor. Note how the old wheel is attached for reference.
- 3. Install the new castor: Align the new Dome Gen 2 Stand Castor with the mounting hole. Insert the stem or bolt and secure it with the original hardware. Ensure the wheel spins freely and the brake engages when pressed.
- 4. Repeat for all four wheels: Replace each castor one at a time. After installation, test the brakes on each wheel before returning the stand to its upright position.
- 5. Final check: With the stand upright and all four wheels on the ground, press each foot brake to lock the stand. Verify the stand is stable and does not rock. If any wheel feels loose, recheck the attachment.
Care and Maintenance Tips
To keep your castors rolling smoothly, periodically check the wheels for debris or wear. Clean the wheel surface with a damp cloth if dirt accumulates. Avoid using harsh chemicals that could damage the plastic or rubber components.
The brakes may require occasional cleaning to ensure they lock firmly. If a brake becomes stiff or fails to engage, inspect the mechanism for obstructions. Store the stand in a dry area when not in use to prolong castor life.
What the Supplied Information Doesn't Cover
The available product records do not include specific torque values, weight limits, or detailed installation diagrams. For precise assembly instructions, always refer to the Dome Gen 2 Stand manual that came with your original purchase. If you no longer have the manual, check the Gozney website for a digital copy.
This guide provides general replacement advice based on the product's intended use. If you encounter resistance during installation, stop and verify fitment—do not force the castor into place.

