When to Replace Your Dome XL Gen 2 Stone: Signs and Steps

Quick Answer

Replace your Dome XL Gen 2 stone when you see deep cracks, warping, or chipping that affect cooking performance or safety. The official Gozney Dome XL Stone Replacement Kit includes everything you need for a straightforward swap.

Diagnosis & Action Guide

• Symptom: Deep cracks that run across the stone's surface or through its thickness, or pieces that have chipped off. If you see a crack wider than 1/8 inch or a missing chip, replacement is necessary.
• Likely Cause: Thermal shock from rapid temperature changes (e.g., splashing cold water onto a hot stone) or physical impact from dropping heavy cookware. Let the stone cool naturally; avoid sudden temperature swings.
• Corrective Action: Order the Dome XL (Gen 2) Stone Replacement Kit - Left (or Right if needed). Remove the old stone by lifting it out of the oven. Place the new stone in the same position, ensuring it sits flat. Use the included adjustment tool to level it if necessary. Install the landing bay protective screen and wear the protective gloves during handling. The kit includes gloves and a tool, so you can complete the swap without additional purchases.
• Stop / Alternative: If the stone has only minor surface staining or small hairline cracks that don't affect cooking, replacement is not urgent. Clean the stone with a stiff brush and re-season it with a thin layer of oil before the next use. Surface blemishes are cosmetic; only structural damage requires a new stone.

Product Info

• Dome XL (Gen 2) Stone Replacement Kit - Left: Kit to replace the left hand (wood burning side) of your Dome XL. Includes stone, stone adjustment tool, landing bay protective screen and protective gloves. You get all the hardware needed for the swap in one box, so you don't have to source individual parts or tools separately.