กลับไปที่บล็อก
คู่มือวิธีการ 2026-11-21 Gozney 1 การดู

How to Install the Tread Roof Rack on Dome XL Gen 2

How to Install the Tread Roof Rack on Dome XL Gen 2

Learn how to install the Tread Roof Rack on your Dome XL Gen 2. This guide covers attachment, prep area use, and key facts to get the most from your accessory.

What the Tread Roof Rack Does for Your Dome XL Gen 2

The Tread Roof Rack turns the top of your Dome XL Gen 2 into a practical work surface. It attaches securely to the oven and provides a built-in prep area and pizza serving location. You can cut up ingredients, slice pizza, or set cookware on it. The rack is especially useful when you are cooking in a remote location and want extra counter space without carrying a separate table.

Tread Roof Rack at a Glance

  • Tread Roof Rack: Length 415mm (16.3") x Width (16.1") x Height 61mm (2.4") These dimensions tell you how much actual work surface you get. The rack is compact enough to store easily but large enough for prepping toppings or holding a pizza.
    Tread Roof Rack
    Tread Roof Rack
  • Tread Roof Rack: Made of durable fibre board with a removable cutting board; roof rack base is lightweight, durable aluminum The fibre board cutting board is removable and the aluminum base can handle hot cast iron when the cutting board is removed. This gives you two surfaces in one accessory.
  • Tread Roof Rack: Quick and secure connect to Tread oven The attachment is designed for a fast, secure fit. You do not need tools or complicated hardware to install it.

How to Install the Tread Roof Rack

The supplied information confirms a quick and secure connect to the Tread oven. The following steps are based on the product's design features and should be used as a general guide. For the most accurate procedure, always refer to the manufacturer's instructions that come with your rack.

  1. Check Compatibility: The Tread Roof Rack is designed for the Tread oven. Ensure your Dome XL Gen 2 is a Tread model before proceeding.
  2. Position the Rack: Place the roof rack on top of the oven so that the mounting points align with the corresponding features on the oven body.
  3. Secure the Rack: Press down or engage the quick-connect mechanism until the rack clicks or locks into place. It should feel solid and not shift when you apply light pressure.
  4. Test the Fit: Gently try to lift or slide the rack. If it moves, re-engage the connection. Once secure, you can add the removable cutting board or leave the aluminum base exposed for hot cast iron.

Using the Prep Area and Hot Cast Iron Feature

With the cutting board in place, the roof rack gives you a clean surface for slicing ingredients or resting a pizza. When you remove the cutting board, the aluminum base can hold hot cast iron cookware. This is handy when you need a safe spot to set a pan or skillet that has just come off the heat. The rack is not a cutting board itself, but the removable board is made of durable fibre board that can handle typical kitchen prep.

What the Supplied Information Doesn't Cover

The product records confirm the attachment method (quick and secure connect) and the ability to place hot cast iron on the aluminum base when the cutting board is removed. They do not include specific load limits, assembly torque values, or detailed instructions for every Dome XL Gen 2 variant. If your oven has a different configuration or if you have questions about weight capacity, check the full manual or contact Gozney support.

บทความที่เกี่ยวข้อง

Customer Service
หน้าแรก
สินค้า
ตะกร้า
โปรไฟล์