Quay lại Blog
Hướng dẫn mua hàng 2026-11-17 Gozney 0 lượt xem

Arc Lite Pizza Oven: Accessories for Your First Bakes

Arc Lite Pizza Oven: Accessories for Your First Bakes

Size up your Arc Lite accessories before you buy. Use the oven's real dimensions to pick a peel, cutter and starter kit that fit your first bakes.

Let the Arc Lite's mouth size pick your accessories

The quickest way to waste money on first pizza oven accessories is to buy a peel that will not clear the oven opening. The Arc Lite is a compact live-fire oven: 430mm (16.9") wide, 481mm (18.9") deep and 297mm (11.7") high on the outside, with an oven mouth of 325mm (12.8") wide by 85mm (3.35") high. Those two mouth numbers are your hard limits for anything that has to slide in and out.

A peel needs to pass through that 325mm opening with a pizza on it, so measure the peel's blade width and the loaded pizza together before you order. A cutter, by contrast, never enters the oven, so its size is a comfort question rather than a fit question. Sorting your shopping list into 'must fit the mouth' and 'does not touch the oven' is the core of a sensible Arc Lite pizza oven setup.

Three accessory groups and what each one has to clear

Treat the Arc Lite as the fixed constraint and buy outward from it.

  • Peel and turning tools: These must pass the 325mm (12.8") wide, 85mm (3.35") high mouth. Check the blade width plus the pizza, not just the blade, and remember that a peel with a long handle is easier to control at a small opening.
  • Cutter and serving gear: No oven-mouth constraint applies. Choose a cutter and board that suit the 12-inch pizza size the Arc Lite is described as cooking, and that store easily if your space is a balcony or rooftop setup.
  • Starter kit items: A gozney arc lite starter kit is only useful if every piece inside it fits the oven or your cooking style. Read the component list against the mouth and stone dimensions rather than buying a bundle on the strength of the box.

Arc Lite dimensions that decide accessory fit

  • Arc Lite: Oven mouth dimensions: W 325mm (12.8") x H 85mm (3.35") This is the clearance every peel and turning tool has to pass through, loaded pizza included.
    Arc Lite
    Arc Lite
  • Arc Lite: Oven internal dimensions: W 325mm (12.8") x D 355mm (14.0") x H 150mm (5.9") The internal footprint tells you how much room a pizza and your tools share once they are inside.
  • Arc Lite: Oven weight: 26.4 lbs (12 kg) A light oven is easy to reposition, which matters when you are deciding where accessories and prep space will live.

Match your peel and cutter to 12-inch pizza, not to the oven's outer size

The Arc Lite is described as reaching 950°F through its lateral flame for perfectly cooked 12-inch pizza. That 12-inch figure is the practical anchor for your arc lite peel and cutter choices: a peel sized for a 12-inch pizza is the natural starting point, and a cutter that comfortably spans a 12-inch pie will do the job without fighting you.

Do not size accessories from the oven's external 430mm (16.9") width. The mouth is narrower than the body, and the internal width matches the mouth at 325mm (12.8"). If a peel's blade is wider than the mouth, it will not matter how well it performs on the bench.

A pre-purchase check you can do with a tape measure

  1. Measure the mouth, not the body: Confirm 325mm (12.8") wide and 85mm (3.35") high on your own oven before ordering a peel or turning tool.
  2. Add the pizza to the peel width: A peel blade narrower than the mouth can still be a problem if the loaded pizza overhangs and catches the opening.
  3. Check where the oven will sit: The Arc Lite is built for balconies, backyards and rooftop gatherings. Make sure the spot you choose leaves room to swing a peel and set down a cutter and board.
  4. Read the starter kit contents line by line: Keep the items that fit the mouth and your 12-inch pizza workflow, and skip bundles that duplicate gear you already own.

Peel versus cutter: which one deserves your first purchase

If you are buying one accessory at a time, the peel is the one with a hard fit requirement.

  • Peel: Must clear the 325mm (12.8") x 85mm (3.35") mouth with the pizza aboard. Buy this first if you are cooking pizza from day one.
  • Cutter: No fit constraint from the oven. Buy it when you want to serve neatly; it will not affect whether the pizza goes in and out.
  • Starter kit: Worth it only when the included peel and tools match the Arc Lite mouth and your 12-inch cooking plan. Otherwise build your own set.

What the supplied information does not settle

The supplied Arc Lite record does not include specific care instructions, safety guidance or a list of officially compatible accessories. That absence is a limit of this evidence, not a statement about the oven. Before you buy a peel, cutter or kit, check the accessory's own listed dimensions against the mouth and internal measurements above, and follow the manufacturer's documentation for the oven and each accessory you add.

Bài viết liên quan

Customer Service
Trang chủ
Sản phẩm
Giỏ hàng
Hồ sơ