How to Set Up the Dome XL Gen 2 Arc + Arc XL Stand
By Gozney | Published: 2026-10-29
Category: How-to Guides
Learn how to assemble and install the Arc + Arc XL Stand for your Gozney Dome XL Gen 2 oven. Step-by-step instructions with common mistakes to avoid.
Quick Answer
Assemble the Arc + Arc XL Stand by attaching the legs, wooden wings, and wheels, then secure your Dome XL Gen 2 oven with the easy-turn fastener. The whole process takes about 20 minutes with basic tools.
Why the Arc + Arc XL Stand Works for Dome XL Gen 2
The Arc + Arc XL Stand is designed primarily for the Arc and Arc XL ovens, but it also accommodates the Dome XL Gen 2 when you need a mobile, lower-profile setup. Its four large wheels make it easy to reposition the oven around your patio or yard, while the durable wooden wings provide extra workspace and hanging hooks for tools.
One trade-off: the stand does not include storage shelves or a built-in gas tank holder, so you'll need to plan for those separately if your cooking routine requires them. For most home cooks, the mobility and quick assembly outweigh these missing features.
Step-by-Step Assembly Guide
- Unbox and Organize Parts: Lay out all components: stand frame, four legs, two wooden wings, four wheels with locking casters, fastener knob, and hardware pack. Confirm you have the Allen wrench included in the box. Common mistake: missing the locking washers. Check the hardware pack against the manual before starting.
- Attach the Legs to the Frame: Insert each leg into the corner brackets of the main frame. Use the provided bolts and Allen wrench to tighten them finger-tight first, then fully tighten once all legs are in place. The frame should sit level on a flat surface. Do not overtighten one leg before the others; you may need slight adjustment for leveling.
- Install the Wooden Wings: Slide each wooden wing into the slots on the sides of the frame. Secure them with the screws from the hardware pack. The wings should sit flush and not wobble. The hanging hooks face outward for easy access. Common mistake: forcing the wing into the slot. If it doesn't slide easily, check for debris or misalignment.
- Attach the Wheels: Press each wheel onto the leg posts until you hear a click. Two wheels have locking casters—place them on the front legs for easier braking. Test that all wheels spin freely and the locks engage. Make sure the locking wheels are on the same side; otherwise the stand may roll when you try to brake.
- Secure the Dome XL Gen 2 Oven: Place your Dome XL Gen 2 onto the stand, aligning the center hole with the fastener bracket underneath. Turn the easy-turn fastener clockwise until it clicks and the oven feels firmly attached. Give it a gentle shake to confirm stability. Never lift the oven by the fastener knob—it is not a carrying handle. Always lift the oven by its body or use two people.
- Test Mobility and Leveling: Roll the stand to your desired location, then lock the two caster wheels. Check that the oven sits level using a bubble level on the stone floor. If not, adjust the non-locking wheels by turning the threaded feet slightly. An uneven oven can cause uneven cooking. Recheck level after moving the stand to a new spot.
Product Facts
- Arc + Arc XL Stand: The Arc + Arc XL Stand is simple to assemble, built to last and easy to maneuver. Your oven securely connects to the stand with an easy turn fastener and sits at the perfect height for cooking. You can attach or remove your Dome XL Gen 2 in seconds without tools, making setup and storage faster than with bolt-on stands.
Arc + Arc XL Stand
